Table of Contents
Advertisement
Remove license-plate plug 1
from its holder and discon-
nect the plug.
Take protection connector 2
out of holder.
Connect connector 1 to
protection connector 2.
Insert end of wiring harness
from connector 1 in mount
of protection connector 2.
Remove screws 3 on left
and right.
Remove screws 4 and
screw 5.
Take off the license-plate
carrier and thread out the
connected cables.
Reinstall screws 4.
Installing license-plate
carrier
Make sure ground is level
and firm and park the mo-
torcycle.
7
93
z
Advertisement
Table of Contents
