Table of Contents
Advertisement
4
44
Use adjusting screws 1 on
left and right to adjust the
rebound stage. Make sure
z
that the settings are identi-
cal on left and right.
If you want to increase
damping, use a screwdriver
to turn the adjusting screws
on left and right in the +
direction.
If you want to reduce damp-
ing, use a screwdriver to
turn the adjusting screws on
left and right in the - direc-
tion.
Rebound stage, basic
setting, front
Turn top adjusting screw
as far as it will go in the
"+" direction, then back
it off 10 clicks in the "-"
direction.
Adjusting front
compression stage
Make sure ground is level
and firm and park the mo-
torcycle.
Use adjusting screws 1 on
left and right to adjust the
compression stage. Make
sure that the settings are
identical.
If you want to increase
damping, use a screwdriver
to turn the adjusting screws
on left and right in the
clockwise direction.
If you want to reduce damp-
ing, use a screwdriver to
turn the adjusting screws on
left and right in the counter-
clockwise direction.
Advertisement
Table of Contents
