Table of Contents
Advertisement
Insert axis 4.
Tighten axle screw 2 to the
specified torque; if neces-
sary use a screwdriver to
counter-hold at the other
side.
Axle screw of front
wheel in axle holder
Thread-locking
compound: Optimoly TA
30 lb/ft (40 Nm)
Without actuating brake:
firmly compress spring forks
several times.
Tighten the left-hand axle
clamping screws 1 with
torque.
Pinch bolt of axle hold-
er
Tightening sequence: 2x
each side, alternately
6 lb/ft (8 Nm)
Tighten right axle clamping
screws 3 to the specified
tightening torque.
Pinch bolt of axle hold-
er
Tightening sequence: 2x
each side, alternately
6 lb/ft (8 Nm)
Remove front wheel stand.
Ease brake calipers onto
brake disks.
7
75
z
Advertisement
Table of Contents
