Table of Contents
Advertisement
Compression stage,
basic setting, front
Turn bottom adjusting
screw as far as it will go
in the clockwise direction,
then back it off 10 clicks
in the counterclockwise
direction.
Adjusting rear rebound
stage
Make sure ground is level
and firm and park the mo-
torcycle.
Adjust the rebound stage by
turning adjusting ring 1.
If you want to reduce the re-
bound stage, turn adjusting
ring 1 in direction a.
If you want to increase the
rebound stage, turn adjust-
ing ring 1 in direction b.
Rebound stage, basic
setting, rear
Turn adjusting screw
as far as it will go in
the counterclockwise
direction, as viewed from
above, then turn it 19
clicks in the clockwise
direction.
Adjusting rear
compression stage
Make sure ground is level
and firm and park the mo-
torcycle.
4
45
z
Advertisement
Table of Contents
