Table of Contents
Advertisement
Push the rear-wheel stand
from the right onto the rear
axle.
Mount lock washer 2 from
left by pressing release but-
ton.
Place your left hand on the
motorcycle and your right
hand on the lever 4 of the
rear wheel stand.
Raise motorcycle while si-
multaneously pressing lever
downward until motorcycle
stands vertically.
Press lever onto ground.
Lamps
General instructions
A warning appears in the mul-
tifunction display if a bulb is
defective. If the brake or rear
light fails, the symbol is ac-
companied by the 'General'
warning light, which lights up
yellow. If the rear light fails
the second filament of the
brake light shines at reduced
brightness to double as a rear
light. Even though you have
this substitute rear light, the
indicators in the display tell
you that a bulb defect has oc-
curred.
A defective bulb places
your safety at risk be-
cause it is easier for other
users to oversee the motor-
cycle.
Replace defective bulbs as
soon as possible; always car-
ry a complete set of spare
bulbs if possible.
The bulb is pressurized
and can cause injury if
damaged.
Wear eye and hand protection
when replacing bulbs.
An overview of the bulb
types installed in your
motorcycle is provided in the
chapter "Technical Data".
7
79
z
Advertisement
Table of Contents
