Table of Contents
Advertisement
Installing rear-wheel
7
stand
96
Set the desired height of the
rear wheel stand using the
z
bolts 1.
Remove the lock washer 2;
to do so, press the unlock
button 3.
Push the rear-wheel stand
from the right onto the rear
axle.
Apply the retaining disk
from the left; to do so, press
the unlock button.
Place your left hand on the
passenger grab handle of
the motorcycle and your
right hand on the lever of
the rear wheel stand 4.
Raise the motorcycle while
simultaneously pressing the
lever downward until the
motorcycle stands vertically.
Press the lever onto the
ground.
Lamps
General instructions
A bulb failure is signaled to
you in the multifunction dis-
play by a warning indicator.
A defective bulb places
your safety at risk be-
cause it is easier for other
Advertisement
Table of Contents
