Table of Contents
Advertisement
Mirrors
6
Adjusting mirrors
112
z
Move mirror to the desired po-
sition by turning it.
Adjust mirror arm
Slide protective cap 1 up over
screw connection on mirror
arm.
Loosen the nut 2.
Turn mirror arm into desired
position.
Tighten the nut to the spec-
ified torque while holding the
mirror arm to ensure that it
does not move out of position.
Mirror (locknut) on
adapter
16 lb/ft (22 Nm) (Left-hand
thread)
Slide protective cap 1 over
screw fitting.
Adjusting mirrors
with Option 719 Milled Parts
Set Classic
OE
or
with Option 719 Milled Parts
OE
Set Storm
or
with HP machined-parts pack-
OE
age
NOTICE
To adjust the mirror arm, a small
and a large angle screwdriver are
included with the vehicle.
Advertisement
Table of Contents
