Sony DSC-T1 Cyber-Shot Operating Instructions Manual page 96

C<tU$E!
Your camera does not
.
You are not
using
an "InfoLITHIUM"
battery
7 Use an "InfoLITHIUM" battery pack (page Ill).
work.
pack.
.
The battery level is low. (The CQ indicator
7 Charge the battery pack (page II).
appears.
)
;
.
The AC Adaptor is not connected securely.
7 Connect it securely to the multi connector of your camera and to
I
a wall outlet (wall socket) (page 15).
.
The camera is not properly installed to the USB
7 Properly install the camera (page 10).
cradle.
The power is on, but the
.
The built-in microcomputer is not working
7 Disconnect, and then, after one minute, reconnect all power
camera does not work.
properly.
sources and turn on the camera.
If
this does not work, press the
RESET button on the lower side of the control button using a
fine-tipped object, then turn on the power again. (All the
settings including date and time are cleared.)
You cannot identify an
-
7 Check the indicator (pages 114 to 117).
indicator on the LCD
screen.
The lens gets fogged.
.
Moisture condensation has occurred.
I
7 Turn off the camera and leave for about an hour at room
temperature for the moisture to evaporate before use (page 108).
The camera becomes
-
7 This is not a malfunction.
warm when you use it for a
while.
Others
96