Sony DSC-T1 Cyber-Shot Operating Instructions Manual page 74

Cutting movies
o
Set the mode switch to [E.
m
Select the movie you want to
cut with /~.
m
Press MENU.
The
menu
appears.
E!
Select ~ (Divide) with ~, then
press
..
Next, select [OK] with
..., then press ..
The playback of the movie starts.
g
Decide on a cutting point.
Press. at the desired cutting point.
When you want to adjust the cutting
point, use [ II!II~] (frame forward/
rewind) and adjust the cutting point
using /~. If you want to change the
cutting point, select
[Cancel]. The
playback of the movie starts again.
m
When you have decided on a
cutting point, select [OK] with
J./'If, and press
..
74
61
Select [OK] with ..., then press
..
The movie is cut.
To cancel cutting
Select [Exit] in step
g
or
61.
The movie
appears on the LCD screen again.
.
You cannot cut the following images.
-
Still images
-
Movie files oot long enough to cut
- Protected movie files
.
You cannot restore files once you cut them.
.
The original movie is deleted when you cut it.
.
The cut movies are recorded as the newest files
in the selected recording folder.
Deleting unnecessary
portions of movies
o
Cut an unnecessary portion of
a movie (page 74).
m
Display the portion of the
movie you want to delete.
m
Press ;;~; Inn
(Delete).
The movie
has not yet been deleted at
this point.
E!
Select [Delete] with ..., then
press
..
The movie currently displayed on the
LCD screen is deleted.
.
Note that you cannot restore deleted portions of
movies.