Sony DSC-T1 Cyber-Shot Operating Instructions Manual page 107

:I!=
(Setup 1)
LCD Brightness
LCD Backlight
Beep
rl1 Language
;;: (Setup 2)
File Number
USB Connect
Video Out
!
Clock Set
Bright / INonnal / Dark
Bright / INonnal
Shutter
Ian
Off
Reset
PTP / INonnal
NTSC
PAL
OK / Cancel
Selects the LCD brightness. This has no effect on the recorded images.
Selects the brightness ofthe LCD backlight. Selecting [Bright] makes the screen bright and casy
to see when using the camera outdoors or in other bright locations, but also uses up the battcry
charge faster. Displayed only when using your camera with the battery pack.
- Turns on the shutter sound. (The shutter sound is heard when you press the shutter button.)
-
Turns on the beep/shutter sound when you press the control button/shutter button.
- Turns off the beep/shutter sound.
Displays the menu items, warnings and messages in selected language.
- Assigns numbers to files in sequence even if the "Memory Stick Duo" is changcd or the
recording folder is changed.
-
Resets the file numbering and starts from 0001 each time the folder is changed. (When the
recording folder contains a file, a number one higher than the largest number is assigned.)
Switches the USB mode (page 79).
-
Sets the video output signal to NTSC mode (e.g., USA, Japan).
- Sets the video output signal to PAL mode (e.g., Europe).
Sets the date and time (pages 17 and 44).
:b
~
g:
""
!!!.
5'
0'
~
'" g.
""
..
107