Sony DSC-T1 Cyber-Shot Operating Instructions Manual page 70

Shooting movies
Mode switch:
U
You can shoot movies with sound using
your camera.
Control button
Microphone
Shutter button
101
:iJ:
/
lID
o
Set the mode switch to
n.
m
Press ;;~:r@ (Image Size).
The Image Size setup appears.
70
BJ Select the desired size with
J./
T.
You can choose from [640(Fine)],
[640(Standard)] and [160].
.
[640(Fine)] can be recorded only on
"Memory Stick PRO Duo:'
II
Press the shutter button fully
down.
"REC" appears on the LCD screen and
the camera starts recording the image
and sound.
Recording stops when the "Memory
Stick Duo" is full.
iii
Press the shutter button fully
down again to stop recording.
Indicators during shooting
The screen indicators are not recorded.
Each time you press 101, the status ofthe
LCD screen changes as follows: Indicators
off
-+
LCD backlight off
-+
Indicators on.
A histogram is not displayed.
For a detailed description of the indicators,
see page
115.
Shooting close-ups (Macro)
Set the mode switch to
n
and follow the
procedure on page 27.
Using the self-timer
Set the mode switch to [tj] and follow the
procedure on page 28.
.
Do not touch the microphone during shooting
movies.
.
You cannot use the following functions during
shooting movies:
-
Changing the zoom scale
-
Flash
-
Inserting the date and time .
When you set the image size to [640(Fine)]
while connecting the NV connecting cable to
NY OUT (MONO) jack, the subject does not
appear on the LCD screen. The LCD screen
turns blue. .
For the
recording time in each movie mode, see
page 10 I.