Sony DSC-T1 Cyber-Shot Operating Instructions Manual page 90

UHuU.HH
H
......u.U...... !!!Hi
!"u!'!ii!! .'.!HU!..UUU! uUi!H!Uu".!H. i.u.u..!...uHHUUU
iHuH
UuH..uU"D
DuU
DD
HH
The LCD screen turns
.
The image size is set to [640(Fine)] while an AI
-+Disconnect the AIV connecting cable.
blue and the subject does
V connecting cable is connected to the AfV OUT
-+ Set the image size to other than [640(Fine)].
not appear when
(MONO) jack.
recording movies.
The image is out of focus.
.
The subject is too close.
-+Use close-up (Macro) function and set the lens position father
away from the subject than the shortest shooting distance
(page 27). Or. set
a
(Camera) in the menu to ~Q,:
(Magnifying glass mode) and focus within the range of 1 em to
20 em (13/32 inch to 7 7/8 inches) from the subject (page 32).
.
When shooting still images,
a
(Camera) in the
-+Set it to other settings (page 32).
menu is set to ~Q,:(Magnifying glass mode),
J
(Twilight mode), ~(Landscape mode) or
f;~<.\ ( Fireworks mode). .
The focus preset function is selected.
-+Cancel the function (page 49).
Zoom does not function.
.
You cannot change the zoom scale when
-
shooting movies.
Optical zoom does not
.
When shooting still images,
a
(Camera) in the
-+Set it to other settings (page 32).
function.
menu is set to ~Q,: (Magnifying glass mode).
Digital zoom does not
.
[Digital Zoom] is set to [Off] on the Setup
-+Set [Digital Zoom] to [Smart]or [Precision](pages 44 and 106).
function. screen.
.
The image size is set to [5M] or [3:2] (only when -+Set image size to other settings except [5M] and [3:2] (page 20).
using the smart zoom).
.
You are shooting in Multi Burst mode (only
-+Set [Digital Zoom] to [Precision] (pages 44 and 106).
when using the smart zoom).
The image is too dark.
.
You are shooting a subject with a light source
-+Adjust the exposure (page 50).
behind the subject.
.
The brightness of the LCD screen is too low.
-+Adjust the brightness of the LCD screen (pages 44 and 107).
.
The LCD backlight is turned off.
-+Turn on the LCD backlight with
101
(page 25).
The image is too bright.
.
You are shooting a spotlighted subject in a dark
-+Adjust the exposure (page 50).
location such as on a stage.
.
The brightness of the LCD screen is too bright.
-+Adjust the brightness of the LCD screen (pages 44 and107).
Vertical streaks appear
.
The smear phenomenon is occurring.
-+This is not a malfunction.
when you are shooting a
very bright subject.
90