Sony DSC-T1 Cyber-Shot Operating Instructions Manual page 28

... Center the su bjecti
n the frame.
Press and hold the shutter
button halfway
down, then
press the shutter
button fully
down.
To return to normal recording mode
Press ~ (~) on the control button again.
The
~
indicator disappears from the LCD
screen.
.
When shooting in close-nps (Macro) mode, the
focns depth becomes extremely shallow, and
the entire subject may not be in focns.
.
When shooting in close-nps (Macro) mode, the
AF speed drops in order to focus accurately on
close snbjects.
28
Using the self.timer
... Set the mode switch to
a
, and
press T
(i9)
on the control
button.
The
i9
(self-timer) indicator appears on the
LCD screen.
.
When recording with the self-timer, place the
camera in a stable location. If you place the
camera in an unstable location for recording,
the camera may fan and become damaged or
malfunction.
.
\fthe menu is cnrrently displayed, press MENU
first so that the menu disappears.
.
You can also carry out this operation when the
mode switch is set to
a.
... Center the subject in the frame.
Press and hold the shutter
button halfway down, then
press the shutter button fully
down.
The self-timer lamp (page 8) flashes and a
beep sounds after you press the shutter
button until the shutter operates
(approximately 10 seconds later).
To cancel the self-timer in the middle
of the operation
Press
T (19) on the control button again.
The
i9
indicator disappears from the LCD
screen.
.
If you press the shutter button while standing in
front of the camera, the focus and the exposure
may not be correctly set.