Setting The Date And Time - Sony DSC-T1 Cyber-Shot Operating Instructions Manual

Setting the date and time
.. Set the mode switch to
101.
.
You cau also carry out this operatiou when the
mode switch is set to
~
or
~
.
.
To change the date and time on the Setup
screen, select [Clock Set] in
==
(Setup 2)
(pages 44 and 107), and perfo~ the procedure
from step
lI~l
..
Slide the lens cover or press
the POWER button to turn on
the camera.
The POWER lamp (green) lights up and the
Clock Set screen appears on the LCD
screen.
.. Select the desired date display
format with JJ./T
on the control
button, then press
..
Select from [Y/M/D] (year/month/day),
[M/DIY] (month/day/year) or [DIMlY]
(day/month/year).
.
If the rechargeable button battery (page 109),
which provides the power for saving the time
data, ever becomes low, the Clock Set screen
will appear again. When this happens, reset the
date and time, by starting from step
m
above.
-
I i{
~
<Q
I/)
at
i
Q.
II........
17