Sony DSC-T1 Cyber-Shot Operating Instructions Manual page 79

Connecting the camera to
your computer
o
Turn
on your computer.
m
Insert the "Memory Stick Duo"
with the images you want to
copy into the camera.
.
For further details on the "Memory Stick Duo,"
see page 19.
m
Connect the USB cradle
(supplied) and the AC Adaptor
(supplied), and plug the
adaptor into a wall outlet (wall
socket).
AC Adaptor
To a
wall
outlet
(wall socket)
()
.
When you copy images to your computer using
the battery pack, copying may be failed or
cause data corruption by battery shutoff. We
recommend that you use the AC Adaptor.
19
Connect the USB cable to the
t
(USB) jack of the USB
cradle.
g
Connect the USB cable to your
computer.
.
When you use a desktop computer, we
recommend that you connect the USB cable to
the USB connector on the rear panel.
.
When using Windows XP, the AutoPlay wizard
automatically appears on the desktop. Proceed
to page 82.
m
Connect the camera to the
USB cradle and turn on the
camera.
.
Make
sure the camera is securely connected to
the USB cradle.
use Mode
Normal
o
Access
indicators'
"USB Mode Normal" appears on the
LCD screen of the camera. When a
USB connection is established for the
first time, your computer automatically
runs the used program to recognize the
camera. Wait for a while.
*
During communication, the access
indicators
turn red.
.
If "USB
Mode Normal" does not appear in step
151, confirm that [USB Connect] is set to
[Normal] on the Setup screen (page 107).
.
Do not remove the camera from the USB
cradle during USB connection, as the
image data may be destroyed. To end
the USB connection, see the note Ii on
page 80.
g.
o'
'S.
ea
~.
m
o
::.
~
~
...
~
c::
Cb
..,
II........
79