Sony DSC-T1 Cyber-Shot Operating Instructions Manual page 75

Copying images to
your computer
-
For Windows users
Recommended computer
environment
os: Microsoft Windows 98, Windows
98SE, Windows 2000 Professional,
Windows Millennium Edition, Windows
XP Home Edition or Windows XP
Professional
The above OS must be installed at the
factory. Operation is not assured in an
environment upgraded to the operating
systems described above or in a multi-boot
environment.
CPU: MMX Pentium 200 MHz or faster
USB connector: Provided as standard
Display: 800 x 600 dots or more
High Color (16-bit color, 65,000 colors) or
more
o
This cameraconformsto USB 2.0.
o Use with a USB 2.0 (High-Speed USB)
compatible computer environment allows high-
speed data transfer.
o If you connect two or more USB equipment
to
a single computer at the same time, some
equipment, including your camera, may not
operate depending on the type of USB
equipment.
.
Operations
are not guaranteed when
using a
USB hub.
o Operations are not guaranteed for all the
recommended computer environments
mentioned above.
USB mode
There are two modes for connecting to a
computer, [Normal] and [PTP]* modes.
The factory setting is the [Normal] mode.
This section describes the [Normal] mode
as an example.
* Compatible only with Windows XP. When
connected to a computer, only the data in the
folder selected by the camera is copied to the
computer. To select a folder, perform the
procedure on page
60.
Communication with your
computer
When your computer resumes from the
suspend or sleep mode, communication
between your camera and your computer
may not recover at the same time.
When a USB connector is not
provided on your computer
When neither a USB connector nor a
"Memory Stick" slot is provided, you can
.copy images using an additional device. See
the Sony Website for details.
http://www.sony.net/
Contents of the CD-ROM
. USB Driver
This driver is needed in order to connect the
camera to a computer.
o
When using Windows XP, you need not install
the USB driver.
. Image Transfer
This application is used to easily transfer
images from the camera to a computer.
. ImageMixer
This application is used to display and edit
images that are stored in a computer.
o
The required operations may differ depending
on your OS.
o
Close down all applications running on
the computer before installing the usa
driver and application.
o
When using Windows XP or Windows 2000,
log on as Administrators.
o The display settings should be 800 x 600 dots
or more and High Color (l6-bit color, 65,000
colors) or more. When set to less than 800 x
600 dots or 256 colors or less, the model
selection screen does
not appear.
g.
0'
'<:
.g'
3'
i
o
'"
'a c :: ...
(') o
.g
c::
(ti
...
-
75