Sony DSC-T1 Cyber-Shot Operating Instructions Manual page 4

Before using your camera
Trial recording
Before
you record one-time events, you may want
to make a trial recording to make sure that the
camera is working correctly.
No compensation for contents of the
recording
Contents of the recording cannot be compensated
for if recording or playback is not possible due to
a malfunction of you I camera or recording media,
etc.
Back up recommendation
To avoid the potential risk of data loss, always
copy (back Up) data to a disk.
Notes on image data compatibility
.
This camera conforms with the Design rule for
Camera File system universal standard
established by the JEITA (Japan Electronics
and Information Technology Industries
Association).
.
Playback of images recorded with your camera
on other equipment and playback of images
recorded or edited with other equipment on
your camera arc not guaranteed.
Precaution on copyright
Television programs, films, video tapes, and other
matcdals may be copyrighted. Unauthorized
recording of such materials may be contrary to
the provision of the copyright laws.
4
Do not shake or strike the camera
In addition to malfunctions and inability to record
images, this may render the "Memory Stick Duo"
unusable or image data breakdown, damage or
loss may occur.
LCD screen, LCD finder (only models
with an LCD finder) and lens
.
The LCD screen and the LCD finder are
manufactured using extremely high-precision
technology so over 99.99% of the pixels arc
operational for effective use. However, there
may be some tiny black points andJor bright
points (white, red, b1ue or green in color) that
constantly appear on the LCD screen and the
LCD finder. These points are normal in the
manufacturing process and do not affect the
recording in any way.
.
Be careful when placing the camera near a
window or outdoors. Exposing the LCD screen,
the finder or the lens to direct sunlight for long
periods may cause malfunctions.
.
Do not press the LCD screen hardly. The screen
may be uneven and that may cause a
malfunction.
.
Do not press the lens portion hard, or it may
cause the malfunction of the lens.
.
Images may be trailed on the LCD screen in a
cold location. This is not a malfunction.
Carl Zeiss lens
This camera is equipped with a Carl Zeiss Jens
which is capable of reproducing sharp images
with excellent contrast.
The lens for this camera has been produced
under a quality assurance system certified by
Carl Zeiss in accordance with the quality
standards of Carl Zeiss in Germany.
Clean the flash surface before use
The
heat of flash emission may cause dirt on the
flash surface to become discolored or to stick to
the flash surface, resulting in insufficient light
emission.
Do not get the camera wet
When taking pictures outdoors in the rain or
under similar conditions, be careful not to get the
camera wet. If moisture condensation occurs, see
page 108 and follow the instructions on how to
remove it before using the camera.
Do not expose the camera to sand or
dust
Using the camera in sandy or dusty locations may
cause malfunction.
Do not aim the camera at the sun or
other bright light
This may cause irrecoverabledamage to your
eyes. Or it may cause the malfunction of your
camera.