Conducting A Conference - Siemens OpenStage 60T User Manual

Step by Step
Start conference
Return to held call
Conference
Add party
Conference
Remove party

Conducting a conference

In a conference call, you can talk to as many as four oth-
er parties at the same time. These may be internal or
external users.
[
You are conducting a call.
g
if nec.
Open the context menu ! page 30.
Select and confirm the option shown.
j
Call a third party.
if nec. If the third party does not answer:
Confirm.
Inform this party that you are initiating a conference.
Select and confirm the option shown.
Z
A tone sounds every 30 seconds to indicate that a con-
ference is in progress.
Adding up to five parties to a conference
g
if nec.
Open the context menu ! page 30.
Confirm.
j
Call the new party.w
Select and confirm the option shown.
Removing parties from the conference
W
Select a station.
g
Open the context menu ! page 30.
Select and confirm the option shown.
You can only add parties to or remove them from
a conference if you initiated the conference.
If a participant that was connected to the confer-
ence via an unencrypted line leaves, the confer-
ence remains unsecured.
Enhanced phone functions
71