Ip Qos; Ip Qos Classification - D-Link DPN-101G User Manual

Section 3 - Configuration
Click Advance > IP QoS, the page shown in the following figure appears. The IP QoS page contains Classification and QoS Queue.
Click Advance > IP QoS > Classification, the page shown in the following figure appears. Here configure the classification rule to specify which
parameters are used to identify the packets and move packets to specific QoS queue.
The following table describes the parameters of this page:
Field
Here you can configure the matched parameters
Specify Traffic
of classification rule. It contains IP, Protocol,
Classification Rules
Physical Port, interface.
Here you can configure the target action when
Classification packets matched the classification rule. You
Results can move it to specific QoS queue and add the
specific mark.
D-Link DPN-101G User Manual

IP QoS

IP QoS Classification

Description
25