Technical Specification - Record Power TS315 Original Instruction Manual

Cast iron table saw with scoring

Hide thumbs

Table Of Contents

Table of Contents

2.3

SPECIFICATION

Main blade size:

With optional table insert and scoring blade removed:

Scoring blade size:

Main blade bore:

Scrolling blade bore:

Blade speed:

Max width of cut with fence:

Sliding carriage stroke:

Max depth of cut using 254mm blade:

Max depth of cut using 315mm blade:

ports

Motor power (output)

Nett Weight

2.4 Recommended Protective Clothing

• Non-slip footwear is recommended.

• Do not wear loose clothing, neckties or jewellery; they can be caught in moving parts.

• Roll up long sleeves above the elbow.

• Wear protective hair covering to contain long hair.

2.5 Noise Emission

The measurements of noise, in the working position and during operation, were carried

out under the standard ISO 7960 annex "J":

Instantaneous acoustic pressure:

Sound power level(no load)

Sound power level(load)

Sound Pressure level(no load)

Sound Pressure level(load)

The figures quoted are emission levels and are not necessarily safe working levels. Whilst there is a correlation

between the emission and exposure levels, this cannot be used reliably to determine whether or not further

precautions are required. Factors that influence the actual level of exposure of the workforce include the

characteristics of the work room and the other sources of noise i.e. the number of machines in operation and other

adjacent processes. Also the permissible exposure level can vary from country to country. This information, however,

will enable the user of the machine to make a better evaluation of the hazard and risk.

2.6 Prescribed Use Of The Machine

This machine has been designed to cut and square heartwood, fibreboard, chipboard panels,

plywood and laminated board both coated and uncoated. Materials different from those quoted above, since

dissimilar to wood, are thus prohibited: the user is solely responsible for any damage caused by machining such

materials. Always connect the machine to a sufficient dust extraction system. Failure to do so may invalidate the

warranty.

2.7 Hazards

ATTENTION: Table saws still present risks that cannot be eliminated by the manufacturer. Therefore the user must

be aware that wood working machines are dangerous if not used with care and all safety precautions adhered to.