Page 1
For your safety read instructions carefully before assembling or using this product. Always wear safety glasses when Always read the instructions using woodworking equipment. provided before using Save this manual for future reference. woodworking equipment. SS16V Manual 4.0 (54100, 54101, 54102) 4.0.indd 1 10/09/2015 11:17...
Contents of the Package Intended Use of the Scrollsaw Assembly Operation Electrical Connection & Wiring Diagram 10 Dust Extraction 11 Scrollsaw Blade Choice 12 Parts List & Diagram EU Declaration of Conformity SS16V Manual 4.0 (54100, 54101, 54102) 4.0.indd 2 10/09/2015 11:17...
Indicates a risk of severe personal injury from electrical shock Risk of personal injury from lifting of heavy items Indicates a risk of severe personal injury from airborne objects Risk of fire SS16V Manual 4.0 (54100, 54101, 54102) 4.0.indd 3 10/09/2015 11:17...
• Never leave the machine running unattended. Turn the power supply off that any vehicles or manual handling equipment used for transportation and do not leave the machine unattended until it comes to a SS16V Manual 4.0 (54100, 54101, 54102) 4.0.indd 4 10/09/2015 11:17...
Page 5
• Before each use of the machine, it should be carefully checked to determine that it will operate properly and perform its • Use extra supports (roller support stands etc.) for any work pieces large SS16V Manual 4.0 (54100, 54101, 54102) 4.0.indd 5 10/09/2015 11:17...
Guarantee Any damage to the Product resulting in a potential claim under the Record Power guarantees that for a period of 5 years from the date guarantee must be reported to the Authorised Dealer from which it of purchase the components of qualifying Products (see clauses 1.2.1 was purchased within 48 hours of receipt.
50 mm. It may also be used to cut many other materials, including plastic, non-ferrous metals, composite boards and bone. Care must be taken when using the SS16V to select the correct blade for the material type and thickness being cut, as well as the type of cut being made.
7. Assembly The SS16V is supplied almost fully assembled, only the dust blower pipe and Fig 7.1 blade guard must be fitted before use. One end of the dust blower pipe is supplied unconnected as shown in Fig 7.1. This loose end must be connected to the bellows cap by pushing it over the cap as shown in Fig 7.2.
The SS16V Scrollsaw can accept both pin-end and plain-end blades. Upper blade holder Fitting Pin-End Blades The SS16V has 2 blade holders. The upper holder is located at the end of Fig 8.2 the arm as shown in Fig 8.1 and the lower holder is beneath the table as shown in Fig 8.2, viewed through the table insert hole.
Page 10
To ensure the blade adaptors are attached in the correct position on the blade, the plain blade setting jig on the arm of the SS16V should be used as shown in Fig 8.9. To fit the blade to the adaptor, position one of the blind set screws to protrude approximately halfway into the hole as shown in Fig 8.8 using...
Page 11
Please note: Over-tightening of the scrollsaw blade will shorten the blade's life and may cause it to break. Fig 8.13 Fig 8.14 Fig 8.15 SS16V Manual 4.0 (54100, 54101, 54102) 4.0.indd 11 10/09/2015 11:17...
Page 12
Loosen the table locking knob in order to position the table between 0 and knob 45º and re-tighten once the table is in the desired position. Fig 8.20 90º SS16V Manual 4.0 (54100, 54101, 54102) 4.0.indd 12 10/09/2015 11:17...
Page 13
The adaptors also feature 2 holes on the adjacent sides to these holes, see Fig 8.25. Fig 8.23 Fig 8.24 Loosen screw to move drop foot Fig 8.25 SS16V Manual 4.0 (54100, 54101, 54102) 4.0.indd 13 10/09/2015 11:17...
Page 14
A dust extractor should be connected to the outlet using a hose and connector of the appropriate diameter. The Record Power DX1500B power tool hose and DX1500C stepped adaptor can be used for this purpose.
In the case of the BS1363 plug for use in the UK, always ensure that it is fitted with a fuse conforming to BS1362 appropriate to the rating of the SS16V Manual 4.0 (54100, 54101, 54102) 4.0.indd 15 10/09/2015 11:17...
Record Power Extractors be switched off for 20 minutes every hour. 0.5 micron filtration Record Power offer a range of high quality dust extractors, we offer both drum and bag type extractors which filter down 0.5 micron providing CX2000 Compact Chip Extractor protection from harmful fine dusts.
Record Power scroll saw blades are a premium quality range of blades made MDF, plywood, plastic, non ferrous metals and horn. in Germany. They have been specifically chosen to offer cutting solutions to the vast array of possibilities a scroll saw offers and include both plain and pin end types.
EU Declaration of Conformity Cert No: EU / SS16V / 1 Record Power Ltd, Centenary House, 11 Midland Way, Barlborough Links, Chesterfield, Derbyshire S43 4XA declares that the machinery described:- 1 Type: Scroll Saw 2 Model No: SS16V 3 Serial No .................