Saw Blade Tilting And Lifting - Record Power TS315 Original Instruction Manual

4.3. Saw Blade Tilting And Lifting

Release knob (E, Fig.29) and adjust handwheel (F, Fig.29) to adjust the saw
blade height.
Loosen the knob (G, Fig.29) and act on the knob (H, Fig.29) to adjust the
tilting of the saw blade.
Read the tilting value of the saw blade on the index.
4.4. Rip Fence Adjustment
The rip fence can be fitted in two positions :
1 - for cutting large pieces (Fig.30)
2 - to cut low and narrow pieces Loosen the handles C in order to place the
fence in the positions shown in Fig. 31.
To increase or decrease the distance between the fence and the saw blade
operate as indicated below:
Release the lever (F, Fig.31) and the knob (D, Fig.31);
Manually slide the fence unit (N, Fig.31) with reference to the metric ruler (E,
Fig.31). Carry out the micrometric adjustment as follows:
Lock the knob (D, Fig.31);
Operate the knob (G, Fig.31) to adjust the fence micrometrically;
Tighten the lever (F, Fig.31) when the adjustment has been made.
F
E
Fig.29
Fig.30
E
Fig.31
G
H
C
D
N
F