Opening/Closing Overhead Window - Hitachi ZAXIS 450LC-3 Operator's Manual

OPENING/CLOSING OVERHEAD WINDOW

Opening
1. Move locks (1) toward center of window.
2. Hold handle (2) and lift window until it rises upright.
With the window positioned upright, it will be secured in
position by dampers (3).
Closing
1. Hold handle (2) and pull window down until "click" sound
is heard from locks (1).
Note that the overhead window can be used as an
emergency exit.
OPENING/CLOSING OVERHEAD WINDOW
(Clear Hatch: If Equipped)
Opening
1. Move locks (1) toward center of window.
2. Hold handle (2) and lift window until it rises upright.
With the window positioned upright, it will be secured in
position by dampers (3).
Closing
1. Hold handle (2) and pull window down until "click" sound
is heard from locks (1).
Note that the overhead window can be used as an
emergency exit.
IMPORTANT:
• Replace the clear hatch with a new one every 5
years even if undamaged. In case it was remarkably
damaged or has received severe shock loads,
replace it even if it has been not in use for 5 years.
• When cleaning the clear hatch, use a neutral
detergent. If acidic or alkaline detergent is used,
the clear hatch may become discolored or crack.
• Keep organic solvent away from the clear hatch.
Failure to do so may cause the clear hatch to
become discolored or crack.
OPERATOR'S STATION
1-78
1
2
3
1
2
3
M1U1-01-053
M1U1-01-054
M1U1-01-055
M1U1-01-054