Selecting an Attachment from Main Menu
1. When the basic screen displays, push the menu key and
display main menu.
2. Select work mode from main menu by using keys 1
and 2
. Push determination key. Then, the work
mode screen displays.
3. Push the key located under an attachment mark to be
used in order to select the attachment.
(In the right example, Breaker 1 is selected.)
f
NOTE: When selecting Digging, return to Main Menu.
4. On the attachment specification screen, confirm if
specification of the installed attachment agrees with that
displayed on the screen.
f
NOTE: When pushing the back key, return to the basic
screen.
5. Push the determination key, and the basic screen
displays.
Digging
Select
Breaker 1
ZX650LC
, 850LC
-3
OPERATOR'S STATION
Back Key
Work Mode Screen
-3
T1J7-02-001-002E
Key 1
Key 2
Digging
Select Breaker 1
ZX450LC
Attachment Specification Screen
1-24
Basic Screen
M1J1-01-002
Back Key
Determination Key
M1J5-05-002
Back Key
Work Mode Screen
-3
M1J5-05-003
M1J5-01-011
Menu Key
Determination
key