Hitachi ZAXIS 450LC-3 Operator's Manual page 338

Hide thumbs Also See for ZAXIS 450LC-3:

Table of Contents

Draining Procedures (Pre-Filter)

1. Place 0.5 liters (0.5 US qt) or larger capacity container

under drain plug (5) to collect the drained water.

2. Loosen plug (4) on the top of the fuel pre-filter.

3. Rotate drain plug (5) on the bottom of the pre-filter

counterclockwise. Drain the water accumulated in the

filter until the float goes to the bottom of case.

4. After draining water, securely tighten drain plug (5) and

5. Start the engine. Check drain plug (5) and plug (4) for

IMPORTANT: After draining water mixed in fuel, bleed air

from the fuel supply system.

Wrench size: 14 mm

Zaxis 650lc-3 Zaxis 850lc-3