Installing And Adjusting Mirror - Hitachi ZAXIS 450LC-3 Operator's Manual

INSTALLING AND ADJUSTING MIRROR

d
WARNING: Adjust the mirror position prior to opera-
tion. If the mirror is incorrectly positioned, sufficient
eye-sight is not obtained, possibly creating a risk of
any hazards resulting in personal injury.
IMPORTANT: The side mirror shall be used as auxiliary
equipment. Before operating the machine,
be sure to sufficiently check that safety
around the machine is ensured.
1. Install cab side mirror (1) with bolts and washers (2) to
the illustrated position. Adjust the mirror direction so
that images on mirror (1) can be clearly viewed from the
operator's seat.
2. Install mirror (3) with bolts and washers (4) onto the
lubricator box on the right side of the base machine.
Adjust the mirror direction so that images on mirror (3)
can be clearly viewed from the operator's seat.
d
CAUTION: Install the mirror in the specified position.
Failure to do so may result in damage to the mirror
and the part on which the mirror is installed.
ASSEMBLING
1
2
6-28
180 mm
4
115 to 130 mm
M1J1-06-027
3
M1J7-06-012