Hitachi ZAXIS 450LC-3 Operator's Manual page 236

4. Stop the engine. Remove the key from the key switch.
5. Move the control levers several times until hydraulic
pressure in the cylinders is released.
6. Pull the pilot control shut-off lever to the LOCK position.
7. Close cab windows, roof vent and door, and cover the
exhaust opening, to prevent entry of wind and water.
d
CAUTION: In cold weather, be sure to warm up the
machine before loading or unloading it.
Transporting
d
WARNING: Fasten chains or cables to the machine
frame. Do not place chains or cables over or against
the hydraulic lines or hoses.
Fasten chains or cables to the machine frame using
lugs provided on the bottom of the track frame. Take
care not to allow the track shoes to come in contact
with chains or cables.
1. Place blocks in front of and behind the tracks.
2. Fasten each corner of the machine and front attachment
to the trailer with a chain or cable.
TRANSPORTING
Tie down
brackets for
transporting.
6-44
M107-06-013
Wire Rope
M1U1-06-001