Table of Contents
Advertisement
PUMP 2 FLOW RATE ADJUSTMENT
(Only Machines Equipped with Optional Parts)
IMPORTANT: This operation is effective when
attachments are used.
1. When the basic screen displays, push the menu key and
display main menu.
2. Select attachment adjustment from main menu by using
keys 1
and 2
attachment adjustment screen for currently installed
attachments displays.
3. Adjust maximum flow rate of Pump 2 by using keys 1
and 2
.
When using breaker 1, 2 or 3, pushing key 1
decrease Max flow rate of pump 2 and pushing key 2
will increase respectively.
f
NOTE: When pushing the back key, return to the previous
screen.
4. Push key 6
, and the basic screen displays.
After adjusting it, the maximum flow rate of pump 2
that has been described on the attachment specification
screen is changed.
OPERATOR'S STATION
. Push determination key. Then, the
Key 1
will
Key 1
Key 6
1-28
Basic Screen
Key 2
Determination Key
Key 2
Back Key
Menu Key
M1J1-01-002
T1V5-05-01-019
M1J5-01-014
Advertisement
Table of Contents
