Attachment Pedal (Hydraulic Crusher) (Optional) - Hitachi ZAXIS 450LC-3 Operator's Manual

ATTACHMENT PEDAL (HYDRAULIC CRUSHER)
(Optional)
Machine stability, applicable hydraulic oil pressure and oil
quantity for crusher, etc. must be examined when selecting a
crusher.
Be sure to consult your authorized dealer when selecting a
crusher.
For operational instructions, refer to the crusher instruction
manual.
Operation
The crusher can be operated using attachment pedal (1)
located on the right front of the seat, as illustrated.
d
WARNING: Be sure to lock attachment pedal (1) with
pedal lock (2) when attachment pedal (1) is not in
use.
When operating a hydraulic crusher, do not step
on attachment pedal (1) rearward. Damage to the
hydraulic crusher may result.
1. Select the proper hydraulic breaker mode on work mode
screen (3) depending on the necessary oil flow rate of
hydraulic crusher employed. Refer to the "work mode "
section on page 5-11 for work mode setting procedures.
2. Move pedal lock (2) forward to unlock attachment pedal
(1).
Note that if the attachment mode is selected, open/close
speed of the crusher may become slow.
3. Push down on attachment pedal (1) either forward or
backward to open or close the crusher.
4. Remove foot from attachment pedal (1) to stop the
crusher.
5. Always keep attachment pedal (1) locked with pedal lock
(2) when attachment pedal (1) is not in use.
OPERATING THE MACHINE
5-6
ZX450LC
-3
ZX650LC , 850LC
-3
Locked Attachment Pedal
Fully Tighten the
Unlocked Attachment Pedal
Stopper Bolt
1
M1J1-01-026
3
Work Mode Screen
M1J5-05-003
3
Work Mode Screen
-3
T1J7-02-01-002E
1
2
M1J1-13-002
1
2
M1J1-13-006