Clean Cab Floor - Hitachi ZAXIS 450LC-3 Operator's Manual

8
Clean Cab Floor --- as required
IMPORTANT: When cleaning the cab floor with tap water,
spray the floor only. Take care not to splash
the surrounding area. Do not increase
water spray speed by restricting the hose
end, and do not use high pressure steam for
cleaning. Be sure to completely remove any
moisture from the surrounding area.
1. Park the machine on solid and level surface. Lower the
bucket to the ground. Before cleaning, stop the engine.
2. Sweep the cab floor clean using a brush, and brush dust
from the cab floor while spraying water.
3. When cleaning the floor mat, sweep dust (water) along
the grooves on the floor mat.
4. When cleaning after removing the floor mat, remove the
two caps plugging the cleaning holes on the floor plate.
Sweep dust (water) through these cleaning holes.
MAINTENANCE
7-107
M1U1-077-052