Hitachi ZAXIS 450LC-3 Operator's Manual page 90

Screen Display when Maintenance Information Display
is ON
• When only one item displays
1. If turning the key switch to the ON position, the starting
screen displays. Then, the scheduled maintenance screen
for the item whose change interval has expired displays
for three to ten seconds. Finally the basic screen displays.
(In the right example, Hydraulic Oil applies.)
f
NOTE: For a machine which the basic screen is displayed
according to a password on , the scheduled
maintenance screen for the item whose change
interval has expired displays for three to ten seconds,
after the password is input successfully and the
determination key is pushed. And then the basic
screen displays.
2. If data is rest, push the reset key while the scheduled
maintenance screen is displayed.
The message "Reset Data. OK?" displays. Then, push the
determination key.
The value of remaining hours is reset to that of change
Interval. Previous change date/hour is updated with
current date and time.
f
NOTE: When pushing the back key while the maintenance
information display screen is displayed, return to the
basic screen.
f
NOTE: When pushing the back key while reset screen is
displayed, return to the maintenance information
display screen.
OPERATOR'S STATION
1-42
Starting Screen
Maintenance Infomation Display Screen
Reset Screen
Basic Screen
T1V1-05-01-115
Back Key
Reset Key
T1V5-05-01-170
Back Key
Determination
Key
T1V5-05-01-171
M1J1-01-002