Opening Upper Front Window (Cab Equipped Machine); Front Window; Removing And Storing Lower Front Window - Hitachi ZAXIS 30U-5N Operator's Manual

Opening Upper Front Window (cab equipped
machine)

Front Window

1. Hold handle (1) at upper part of the front door and pull
lock lever (2) with your finger. Release lock to open the
front window.
2. Pull the upper front window up and back along with the
rail until it securely catches into lock lever (2). This time,
use handle (3) on the lower front window.
3. After confirming that the window securely catches into
lock lever (2), slide lock pin (6) to lock the window in
position.
d
CAUTION:
 Slowly close the upper front window so that not to
catch your fingers.
 Switch (4) is provided on the front window to
prevent the wiper from operating when the front
window is opened. Before closing the front window,
ensure the wiper switch is turned OFF.
 When opening the front window, ensure the left and
right locks are definitely working.
3. Close the upper front window by following steps 1
through 2 in the reverse order.

Removing and Storing Lower Front Window

1. Open the upper front window beforehand when
removing the lower front window. While pulling lower
front window (5) inward, raise it along with the window
sash to remove. Install the lower front window by
following the steps in the reverse order.
d
CAUTION: Lower window (5) breaks easily by
dropping or shock, so carefully place and keep the
removed windowpane in the safe storage area.
OPERATOR'S STATION
1-57
2
1
3
3
4
MADB-01-058
6
1
MADB-01-059
5
MADB-01-060