Attachment Selection (Only Machines Equipped With Optional Parts) - Hitachi ZAXIS 450LC-3 Operator's Manual

ATTACHMENT SELECTION
(Only Machines Equipped with Optional Parts)
IMPORTANT: Select the attachments from the work mode
screen.
In order to display the work mode screen,
push work mode selection key F1 after
basic screen displays, or select from main
menu.
Selecting an Attachment by Using Work Mode Selection
Key F1
1. When the basic screen displays, push work mode
selection key F1 and display the work mode screen.
2. Push a key located under an attachment mark to be used
in order to select the attachment.
(In the right example, Breaker 1 is selected.)
f
NOTE: When selecting Digging, return to the basic screen.
3. On the attachment specification screen, confirm if
specification of the installed attachment agrees with that
displayed on the screen.
f
NOTE: When pushing the back key, return to the previous
screen.
4. Push the determination key, and the basic screen
displays.
OPERATOR'S STATION
Digging
Select
Breaker 1
Digging
Select
Breaker 1
1-23
Key F1
Basic Screen
ZX450LC Work Mode Screen
-3
ZX650LC , 850LC Work Mode Screen
-3 -3
Attachment Specification Screen
M1J1-01-002
Back Key
M1J5-05-003
Back Key
T1J7-02-001-002E
Determination
key
M1J5-01-011