PDT 7200 Series Product Reference Guide
Invoking Setup
To invoke the setup application:
1. Start the terminal by performing a cold boot (press the power button without holding
the trigger until the terminal reboots).
While the terminal is booting, a message displays on the bottom of the screen,
"Hold Trig for Setup".
2. Press and hold the scan trigger button, until the setup application starts. The
Symbol PDT 7200 Setup screen displays, providing the menu of setup options for
selection.
Defaults
Selecting the Defaults option on the main setup screen displays the Reset Confirmation
screen, which allows you to confirm your request to reset the terminal's features to the
9-4
Figure 9-1. PDT 7200 Setup Screen