Configuration Options
The terminal's on-board RAM and on-board flash configuration determine what software
can be loaded on the terminal.
On-Board RAM
RAM configurations range from 8 MB to 16 MB. Following lists the RAM required to run
applications on the PDT 7200.
•
DOS: 2MB
•
DOS and TPA: 1 MB
•
RAM Disk: 1-15 MB
On-Board Flash
PDT 7200 terminals can be ordered with additional on-board flash. To obtain more "disk"
storage, use DRVSPACE™ , compact-flash disk or a PCMCIA card.
Note: Expansion via a PCMCIA card can only be performed on the PDT
7200, not the PDT 724X.
For more information on PCMCIA card options, refer to
page 5-5.
Terminal Configuration Issues
PCMCIA Card Considerations
on
5-3