Introduction
The PDT 7200 Series terminal has a system setup program that allows you to configure
many of the terminal's basic characteristics. Specifically, the setup program is made up of
five screens and defines:
•
contrast value
•
backlight
•
beeper volume
•
suspend time
•
backlight time
•
boot sequence
•
reset time
•
CPU speed
•
system date and time.
Setup also displays the Terminal Type and RAM and Flash sizes. This describes how to set
each of these default values using the setup program.
Navigating Setup
The setup program is a touch-sensitive application, so use your finger to tap the buttons on
the screen.
Terminal Configuration: Setup
9-3