Introduction; Sdk For Dos - Symbol PDT 7200 Series Product Reference Manual

Introduction

To develop applications to run on the PDT 7200, one software development kit (SDK) and
one network development kit (NDK) are available. These kits are:
• The Series 7000 SDK for DOS, which includes:
• MS DOS 6.22
• Symbol-provided DOS Files (TSRs)
• PCMCIA Software
• Default Hex Image
• TCM Scripts
• Sample Code
• The Spectrum24 NDK for DOS, which includes:
• Terminal Network Drivers for ODI
• TCM Scripts
• Sample Code
• Spectrum24 NDK Reference Guide

SDK for DOS

The PDT 7200 is designed to run MS DOS 6.22, and all of the programs provided by
Symbol for the PDT 7200 are based on MS DOS 6.22. If you use any other version of DOS
in the PDT 7200, Symbol cannot guarantee that all of the terminal's features will function
properly.
The SDK installation program loads the required MS DOS 6.22 components on the
development PC used to create the hex files (via Terminal Configuration Manager) for
download to the terminal.
Note: The copy of MS DOS 6.22 supplied in the SDK is for use on the PDT
7200 ONLY. No license is included in the PDT 7200 SDK for using
MS DOS on the development PC; you must have your own valid MS
DOS license (preferably for MS DOS 6.22) for the development PC
to use the SDK.
Software Installation on Development PC
2-3