Starting The Pyrolytic Cleaning Programme - Miele TX3587 Operating And Installation Instructions

Cleaning and care
Starting the Pyrolytic cleaning
programme
,
Danger of burning!
The oven door gets much hotter
during a Pyrolytic cleaning
programme than during normal use.
Make sure children do not touch the
oven whilst a Pyrolytic cleaning
programme is running.
^ Select Pyrolytic cleaning ^.
PY i
PY I appears in the display. The
number flashes.
Use the rotary selector V W to select
between PY I, PY 2 and PY 3.
^ Select the required Pyroytic cleaning
level.
^ Touch the OK sensor.
The Pyrolytic cleaning programme will
now start.
0 will also appear in the display.
PY i
0
0 will flash until the door locks.
90
The oven heating and the cooling fan
will then switch on automatically.
The oven lighting will not come on
during the Pyrolytic cleaning
programme.
If you want to see how the Pyrolytic
cleaning programme is progressing,
you need to highlight the duration
symbol T in the display.
^ Touch X.
^ If necessary, use the rotary selector
V W to move the triangle V until it
appears under T.
The time remaining for the Pyrolytic
cleaning programme will appear in the
display. You cannot alter the duration.
You can use the minute minder at the
same time as the Pyrolytic cleaning
programme is running. At the end of the
minute minder time the buzzer will
sound and the l symbol will start
flashing. The time will then continue to
increase in the display.
The acoustic and visual signals will go
out when you press OK.
PY and the number indicating the
selected Pyrolytic cleaning programme
will then reappear in the display.