Pyrolytic Programme Cleaning - Miele H 7164 BP Operating And Installation Instructions

Pyrolytic programme cleaning

Instead of cleaning the oven
compartment manually you can run the
Pyrolytic programme
During Pyrolytic cleaning the oven
compartment reaches temperatures in
excess of 400 °C. Any residual soiling is
burnt off and turned to ash by the high
temperatures.
There are 3 Pyrolytic settings available,
each with a different duration.
- Level 1 for light soiling
- Level 2 for heavier soiling
- Level 3 for very heavy soiling
The oven door is automatically locked
when the Pyrolytic cleaning process is
started. It cannot be opened until after
the programme has finished.
The timer can be used to delay the start
time of the Pyrolytic cleaning
programme, for instance to make use of
cheaper electricity tariffs.
At the end of the Pyrolytic cleaning
programme any residues such as ash
from the pyrolytic process, which are
formed depending on the oven
compartment's degree of soiling, can
be easily wiped away.
 function.
Cleaning and care
Preparing for pyrolytic cleaning
Accessories that are not suitable for
pyrolytic cleaning will be damaged
by the high temperatures.
Remove all accessories that are not
suitable for pyrolytic cleaning from
the oven compartment before
starting the Pyrolytic cleaning
programme. This also applies to the
shelf runners and any optional
accessories.
Coarse soiling in the oven
compartment can cause thick smoke
to develop.
Burnt-on residues can leave lasting
discolouration or matte patches on
enamelled surfaces.
Before starting the Pyrolytic cleaning
programme, remove coarse soiling
from the oven compartment and
scrape any burnt-on residues off
enamelled surfaces with a glass
scraper.
 Remove all accessories from the
oven compartment, including the
shelf runners.
71