Table of Contents
Advertisement
Océ | Troubleshooting
2.
Turn the printer's power off and prepare a workspace on a flat surface with a clean
drop cloth.
Caution:
few more minutes after powering down to let the illuminators
cool down. Check the temperature before handling the
illuminators.
3.
Open the gantry doors on the side that the lamp bulb will be replaced (Figure 29 ).
6-90
UV lamps may still be hot! It is a good idea to wait a
Figure 29 Illuminator Lamp on Carriage Side
3010102780-B
Advertisement
Table of Contents
Troubleshooting
