Oce Arizona T220UV User Manual page 52

Océ | User Interface
SPECIAL PRINTS
The Special Prints menu gives you access to the Menu Tree print and the Table
Grid print, either metric or imperial version.
Menu Tree Print
The Print Menu Tree menu generates a print which is a graphical illustration of the
T220UVsystem menu tree. This 32 x 56 inch poster illustrates the Operator, Print
Queue, and Configuration menu thus providing you with an overview of the menu
system. It also contains Safety Guidelines, a summary of the Maintenance
Schedule, and Application Tips. If the print does not show up in the Special prints
menu, or of you want to check for an updated version, the Menu Tree Print must
be downloaded from the ODGS web site and then copied to the printer. For
detailed instructions, see Appendix A.
Grid Print
The Table Grid is used to position media for printing. It is printed directly on the
printer table. This ensures that printed production jobs are registered with exact
pixel placement. If necessary, the grid can be cleaned off the table and reprinted.
The grid file comes in two versions: metric and imperial units.
Either the Imperial and Metric grids appear as a menu selection - Operator / Special
Prints. Which one appears depends on what was loaded (see below). Before
printing the grid, make sure that you set the height to 0 (zero) and also when the
display prompts to set the pre-fire strip catcher height, remove any media or other
spacing material from the slot in the catcher.
If the Grid does not appear as a menu option, it must be downloaded from the
ODGS web site and then copied to the printer. For detailed instructions, see
Appendix A.
2-40 3010102780-B