Optical Parts Disassembly
3 Polarized glass(IN)/Optical filter assy removal
Remove 2 screws-A (M2.5x6) on each stopper and take the polarized glasses up-
ward off.
* Note on handling the polarized glass (IN) assy
Care the Polarized glass (IN) assy to maintain with the follow-
ing points.
- When removing the dust on the outer surface of the Polarized
glass (IN) assy, wipe with the soft cloth gently.
- When removing the dust on the inner surface of the Polarized
glass (IN) assy, The inner surface (light incoming side) of
the Polarized glass(IN/B)1 and Polarized glass-(IN/G)1 have
a very sensitive surface. Never touch or wipe the surfaces.
When removing the dust, use a commercial (inert gas) air
spray to remove them. Never use organic solvents. Grab the
edge of the glass with new gloves when handling the polar-
ized glass.
LX1750 Service Manual
020-000643-01 Rev.1 (01-2014)
A
A
A
Polarized glass(IN)/
Optical filter assy
-47-
Never touch or wipe
the surface of this side
(M3x6)
Polarized glass (IN)
assy
Optical filter (ICV) assy
Polarized
glass (IN)1