Optical Parts Disassembly; Order Of Optical Parts Disassembly - Christie LX1750C Service Manual

Optical Parts Disassembly

Disassembly requires a 2.0mm or 2.5mm hex wrench and a screwdriver.

Order of optical parts disassembly

1 Shutter assy removal
2 Panel/Prism assy removal
3 Polarized glass(IN)/Optical filter assy removal
4 Optical filter (LC-CS) removal
5 Integrator assy removal
6 PBS/Integrator(OUT) assy removal
7 Condenser lens assy removal
8 Relay lens assy removal
9 Optical unit top removal
10 Optical lamp unit top removal
1 Shutter assy removal
Remove 2 screws-A (M4x6) to remove the shutter assy upward.
A A
Shutter assy
LX1750 Service Manual
020-000643-01 Rev.1 (01-2014)
2-1 Polarized glasse(OUT)/pre-polarized glasses removal
2-2 LCD panels removal
3-1 Polarized glass(IN)/Optical filter mounting
9-1 Optical parts locations in the optical unit
10-1 Optical parts locations in the optical lamp unit
10-2 Mirror assy removal
10-3 Optical filters assy removal
Guides
Note on mounting the shutter assy
Mount the shutter assy on the panel/prisml assy
carefully to set the holes of the shutter assy onto
the guides of the panel/prism assy.
-43-
Shutter assy
Guides
Panel/prism assy