Adjustment Tool Installation - Christie LX1750C Service Manual

Optical Adjustment

Adjustment tool installation

Note; Before mounting the Adjustment tool, set adjustment screws of Adjustment tool in center of the adjustment
range.
Refer to Screw setting.
1
Loosen 2 screws-A of Prism/LCD panel unit.
CAUTION: When loosening the screws-A, do not touch the other mechanical part or give it shock.
2
Fully loosen 2 screws-B on the Adjustment tool.
3
Fully slide the Adjustment tool part-A into the LCD panel bracket hole.
4
Mount Adjustment tool on the LCD panel/prism unit with 2 screws-C attached with Adjustment tool along the guide
on top of prism assy.
CAUTION: Do not use other kind of screws for mounting, otherwise LCD panel/prism unit may be damaged.
5
Tighten screws-B and hold the LCD panel bracket.
Loosen 2 Screws-B before installation.
Screw-B
Adjustment Tool
Prism/LCD Panel
unit
Step 2
LCD Panel bracket
Screw-B
LCD Panel Bracket
Insert Adjustment tool leg (2 Legs) into LCD
panel bracket holes, and tighten screws-B and
hold LCD panel bracket with Adjustment tool.
Tighten 2 Screws-B and
hold the LCD Panel bracket
Slide the
Adjustment Tool.
Step 3
Part-A
Adjustment
Tool
-70-
Tighten 2 Screws-C and
hold the Prism/LCD Panel
unit
Screw-C
Step 4
LCD panel/prism unit
LCD Panel
Bracket hole
Screw-A
020-000643-01 Rev.1 (01-2014)
LX1750 Service Manual