Adjustment Tool Removal - Christie LX1750C Service Manual

Optical Adjustment

Adjustment tool removal

After completing the adjustment, remove the Adjustment tool as follows.
1
Loosen 2 screws-B and release LCD panel bracket.
Remove 2 screws-C, then remove Adjustment tool.
2
Slide the Adjustment tool, and release from the LCD panel bracket.
3
Remove the Adjustment tool upward.
Loosen 2 Screws-B before remove
Screw-B
Adjustment Tool
Loosen 2 Screws-C
before remove
Prism/LCD Panel
unit
Step 1
LX1750 Service Manual
020-000643-01 Rev.1 (01-2014)
Screw-C
Slide the
adjustment tool
Step 2
-71-
Adjustment tool
The figure is an installation figure for
the adjustment of the Red LCD panel.
Step 3