Print Settings - Lexmark X646ef Menus And Messages Manual

Menu item Purpose
Base file name
Custom Job Allows for scanning of custom scan
scanning to USB jobs.
This is also known as Job Build.
Custom Job is not supported on all
models.
Background Adjusts the amount of background
Removal visible on a copy.
Contrast Specifies the contrast used for the
scan to USB job. The default is
dependent on the Content menu
item. If the Content menu item is
reset from the default setting, then
the default for Contrast is reset,
also.
Shadow Detail Adjusts the amount of shadow
detail visible on a copy.
Scan edge to Specifies if the original document is
edge scanned edge-to-edge prior to
sending the scan to USB job.

Print Settings

Print settings consist of the following menus. Click any of the menus for more information
Finishing Menu
Quality Menu
Utilities Menu
Setup Menu
PostScript Menu
Using the MFP menus
Values and descriptions
text entry
On
Off*
-4 to +4 (0*)
0–5
-4 to +4 (0*)
Off*
On
PCL Emulation Menu
PDF Menu
HTML Menu
Image Menu
Settings
76
The default value is the following word:
image
Note: There is a 53-character limit for the
base file name. The following characters
or symbols are invalid:
* – asterisk
: – colon
? – question mark
< – less than symbol
> – greater than symbol
| – vertical bar
A time stamp is added to the end of the
base file name.
To set to On, select the check box.
To set to Off, clear the check box.
-4 sets Background Removal to off.
+4 sets Background Removal to the
maximum allowed.
Text default is 5.
The default is 0 for items other than text.
-4 preserves the least amount of shadow
detail.
+4 preserves the most shadow detail.