Lexmark X646ef Menus And Messages Manual page 55

Menu item Purpose
Print Page Specifies if a border is printed
Borders around the edge of the page at
the margins.
Collate To keep the pages of a print
job stacked in sequence when
making multiple copies of the
job.
Staple Specifies if the stapler is
turned on or off.
Original Size Provides a list of possible
scanner sizes to select from to
specify the size of the original
copy document.
Copy To Provides a list of possible print
Source media sources to send the
copy job to for printing.
Transparency Places a sheet of paper
Separators between transparencies.
Separator Places a sheet of paper
Sheets between pages, copies, or
jobs based on the value
selected.
Separator Provides a list of possible print
Source media sources where the
separator sheets could be
accessed.
Using the MFP menus
Values and descriptions
On* A page border prints when Paper Saver is set to 2 on
1 Portrait, 2 on 1 Landscape, 4 on 1 Portrait, or 4 on 1
Landscape.
Off A page border does not print.
On* Copies the entire job the number of times specified.
For example, if you set Copies to 2 and have three
pages to copy, the MFP output is page 1, page 2,
page 3, page 1, page 2, page 3.
Off Copies each page of a job the number of times
specified. For example, if you set Copies to 2 and
have three pages to copy, the MFP output is page 1,
page 1, page 2, page 2, page 3, page 3.
Off* The menu item displays when a finisher with a stapler
is installed.
1 staple
Letter (8.5 x 11 (* Denotes a country/region-specific factory default
in.)* value.)
Legal (8.5 x 14 Auto Size Sense determines a single size for a job.
in.) When the MFP is unable to determine a size, the user
is prompted to determine the size of the scan window.
Executive
A default size needs to be pre-selected on the LCD.
(7.25 x 10.5
in.)
Folio (8.5 x 13
in.)
Statement
(5.5x 8.5 in.)
A4 (210 x 297
mm)*
A5 (148 x 210
mm)
JIS-B5 (182 x
257 mm)
Auto Size
Sense
Mixed Sizes
Tray 1* Tray 2 is not listed as a selection in the values list
unless an optional drawer is installed.
MP Feeder
An envelope feeder cannot be a value even if one is
Tray 2
installed.
On* Select On to have sheets placed between
transparencies.
Off
Select Off to not have sheets placed between
transparencies.
None*
Between
Copies
Between Jobs
Between
Pages
Tray 1* Tray 2 is not listed as a selection in the values list
unless an optional drawer is installed.
MP Feeder
An envelope feeder cannot be a value even if one is
Tray 2
installed.
Settings
55