Lexmark X646ef Menus And Messages Manual page 106

Message
Clean scanner glass
Close door or insert
cartridge
Close finisher side door The MFP detects that the finisher side
Close finisher top cover The MFP detects that the finisher top
Disk corrupted
Disk Full – Scan Job
Canceled
Understanding MFP messages
Meaning
During a scanner calibration, the
firmware detects that the scanner
ADF or the flatbed (scanner) glass
may be dirty.
The MFP detects that the upper front
door is open or a toner cartridge is
missing.
door is open.
cover is open.
Occurs when the MFP attempts a
hard disk recovery on a corrupted
hard disk, and the hard disk cannot
be repaired. The hard disk must be
reformatted.
The scan job cancels or stops due to
insufficient hard disk space.
Attendance messages
106
Action
Touch Cancel Job if a scan job is processing
when the attendance message appears. This
cancels the job and clears the message.
Touch Scan from Automatic Document Feeder
if the page jam recovery is active. Scanning
resumes from the ADF immediately after the
last successfully scanned page.
Touch Scan from flatbed if page jam recovery is
active. Scanning resumes from the flatbed
immediately after the last successfully scanned
page.
Touch Finish job without further scanning if
page jam recovery is active. The job ends at the
last successfully scanned page, but the job is
not canceled. Successfully scanned pages go
to their destination: copy, fax, e-mail, or FTP.
Touch Restart job if job recovery is active and
the job is restartable. The message clears. A
new scan job containing the same parameters
as the previous job starts.
• Close the upper front door.
• Install the toner cartridge.
Close the finisher side door to clear the
message.
Close the finisher top cover to clear the
message.
Touch Reformat disk to reformat the hard disk
and clear the message.
Warning: All files stored on the hard disk are
deleted.
Note: The scanner finishes scanning currently
committed pages in the ADF, but data is lost
when the job cancels itself.
Touch Continue to clear the message.