Lexmark X646ef Menus And Messages Manual page 117

Message
59 Incompatible tray [x] An unsupported optional drawer and
61 Remove defective disk The MFP detects a defective hard
62 Disk full
63 Unformatted disk
80 Scheduled maintenance
advised
88 Toner is low
200.yy Paper jam, check
[area name]. Leave paper
in bin.
200.yy Paper jam,[x]
pages jammed. Leave
paper in bin.
Understanding MFP messages
Meaning
its matching tray are attached to the
MFP.
disk. The MFP cannot communicate
with the hard disk; therefore, it cannot
format it either.
The MFP detects that there is not
enough memory or space on the hard
disk to store the data of the print job.
The hard disk is not formatted.
Service is required to maintain printer
performance.
The toner cartridge is running low on
toner.
There is a single jam in the specified
area indicated by area name.
There is a multiple jam. x indicates
the number of jammed sheets of print
media.
Attendance messages
117
Action
Remove the optional drawer.
The MFP ceases normal functions until the
optional drawer is removed.
Touch Continue to clear the message once the
optional drawer is removed.
Remove the defective hard disk and then touch
Continue.
Note: Printer operations cease until the
message is cleared. The only way to clear the
message is to remove the hard disk.
Touch Continue to clear the message and
continue processing the current print job. Any
information not previously stored on the hard
disk is deleted.
• Delete fonts, macros, and other data stored
on the hard disk.
• Install a hard disk with a larger memory
capacity.
Format the hard disk prior to performing
operations that require the hard disk.
If the message remains, the hard disk may be
defective and require replacing.
Replace the maintenance items and if
necessary, reset the printer maintenance
counter.
Replace the toner cartridge if the toner low
alarm sounds.
Touch Continue to clear the message if the
toner low alarm does not sound.
1 Open the upper and lower front doors.
2 To access and clear the jam, remove the print
cartridge.
3 Close the doors.
4 Touch Continue. If all print media is cleared
from the path, the job resumes printing.
1 Open the upper and lower front doors.
2 To access and clear the jam, remove the print
cartridge.
3 Close the doors.
4 Touch Continue. If all print media is cleared
from the path, the job resumes printing.