Lexmark X646ef Menus And Messages Manual page 112

Message
Scan Document Too Long
Scanner ADF Cover Open
Scanner locked, release
lock under scanner
Scanner registration
successfully completed
Some held jobs were not
restored
Unsupported USB device,
please remove
Unsupported USB hub,
please remove
1565 Emul error, load
emulation option
30.yy Invalid refill,
change cartridge
31.yy Replace defective
print cartridge
32.yy Replace
unsupported print
cartridge
Understanding MFP messages
Meaning
The scan job exceeds the maximum
number of pages.
The scanner automatic document
feed cover is open.
The scanner carriage lock is
engaged.
Scanner registration is successful.
Some held jobs are not restored; they
remain on the hard disk and are
inaccessible.
Note: This message appears once
after the MFP firmware tries to restore
all the held jobs on the hard disk
regardless of the number of held jobs
not restored.
The front USB contains a device or
hub that is not recognized.
A USB hub in the front USB is not
recognized.
The download emulator contained in
the firmware card does not function
with the MFP firmware.
Note: The MFP automatically clears
the message in 30 seconds and then
disables the download emulator on
the firmware card.
The MFP detects a refilled Lexmark
Cartridge Return Program print
cartridge.
The MFP detects a defective print
cartridge within 10–20 seconds after
the top cover is closed.
The MFP detects an unsupported
print cartridge within 10–20 seconds
after the top cover is closed.
Attendance messages
112
Action
Note: The scanner finishes scanning current
pages in the ADF, but data is lost when the job
cancels itself after reaching the maximum
number of pages.
Touch Continue to clear the message.
Touch Cancel Job to clear the message if the
job is restartable.
Touch Restart job if the job is restartable. The
message clears, and a new scan job containing
the same parameters as the previous job starts.
The message clears when the cover is closed.
Release the lock under the scanner.
Touch Continue.
Touch Continue to clear the message.
Touch Continue to clear the message.
Remove unrecognized hub or device to
continue.
Remove the unrecognized device to continue
and clear the message.
For help downloading the correct download
emulator version, contact the place where you
bought your printer.
Install a new print cartridge to clear the
message.
Remove the defective print cartridge and install
a nondefective print cartridge for printing to
continue.
During the 10–20 second interval before the
defective print cartridge is detected, the MFP
may continue to print pages; however, the
pages are not reprinted once the new print
cartridge is installed.
Remove the unsupported print cartridge and
install a supported print cartridge for printing to
continue.
During the 10–20 second interval before the
unsupported print cartridge is detected, the
MFP may continue to print pages; however, the
pages are not reprinted once the new print
cartridge is installed.